Public Decontamination Station FSI

Public Decontamination Station

Application Scenarios:

Used for spray decontamination of individuals exposed to toxic substances; can also serve as a temporary meeting room, command post, emergency medical site, etc. Total area: 30㎡. Includes: decontamination tent, electric inflation/deflation pump, air cylinder inflation device (multiple ports for simultaneous inflation), decontamination water supply pump, decontamination drainage pump, decontamination water heater, decontamination solution mixing tank, warm air generator (with temperature controller), portable high-pressure decontamination spray gun, spray system, decontamination wastewater recovery bag. All components feature modular assembly and design, enabling rapid setup of the entire system in under 10 minutes.

Technical Parameters:

Brand: FSI USA

Model: DAT®4070S

Material: PVC

Specification: 30㎡

Tent: Packaged in a carry bag. Inflation time: less than 5 minutes. After inflation, the tent interior is divided into changing area, decontamination spray area, and drying area. Area: 30㎡. Equipped with decontamination spray system, water inlet/drainage system, and lighting system. Inflation volume: 5400 liters. Frame material: PVC air columns. Designed for 4-channel decontamination spray operations. Spray area includes 12 chemical spray heads and 4 clean water shower heads. Two independent spray systems operate in conjunction with the decontamination water heater. Folded dimensions: approx. 700×700×1100 mm.

Electric Inflation/Deflation Pump: For rapid tent inflation and deflation. Voltage: 230V, power: 1500W, pressure: 2.8–10 psi, weight: 520g. Dimensions: 33×20×20 cm.

Decontamination Water Supply Pump: Collects natural water sources in field conditions without municipal water supply. Provides continuous water to the tent’s spray equipment. Motor power: 0.75 kW, voltage: 230V, flow rate: 2500–3500 L/h, supply pressure: 2–6 bar. Automatically stops when no water flow is detected; safety valve activates at high temperatures. Motor protection rating: IP65. Includes 24L pressure vessel with pressure gauge to stabilize and balance water pressure throughout the system. Comes with 5m and 3m hoses connected to the decontamination water heater and pressure vessel via 2 quick-connect couplings. Dimensions: 62×55×32 cm.

Decontamination Drainage Pump: Collects and transfers wastewater for treatment. Housing material: corrosion-resistant PVC. Voltage: 220V, flow rate: 12 m³/h, head: 7m, power: 0.22 kW (220W), diameter: 1 inch (32mm), submersion depth: 7m, noise level: ultra-quiet (10 dB during operation), activation water level: approx. 3cm. Dimensions (H×W): 253×148 mm, weight: 4.5 kg. Inlet passage: 5–8 mm.

Decontamination Solution Mixing Tank: Uses siphon action to mix water and chemicals automatically. Mixing ratio range: 0.4%–4%, flow rate: 20–2500 L/h, water temperature range: 4–30°C, working pressure: 0.2–3 kg/cm², inlet/outlet diameter: 32mm/25mm. Hydraulically driven—no electricity required. Flow-driven piston ensures precise proportional chemical injection. Constant ratio maintained as long as water flows. Includes hoses with quick-connect couplings for connection to the chemical spray system and decontamination water heater. Dimensions: 35×18×40 cm.

Decontamination Water Heater: Fuel-powered heating; reaches 0–50°C in under 20 seconds. Adjustable temperature up to 90°C. Provides hot water for decontamination showers. Max working pressure: 135 bar, flow rate: 600 L/h, fuel type: #0 diesel or lower, fuel consumption: 3 L/h, heating power: 89 kW, voltage: 230V, power: 2.7 kW/230V. Inlet/outlet with quick-connect couplings; includes 5m inlet and outlet hoses connected to the water supply pump and mixing tank. Also includes 10m high-pressure hose, gun handle, spray lance, dual-orifice nozzle, and extension spray gun for external decontamination. Dimensions: <900×710×860 mm, weight: approx. 85 kg.

Warm Air Generator (with Temperature Controller): Provides efficient heating inside the tent. Essential for ventilated tents; quick to install. Fill fuel tank with EL fuel or diesel, connect exhaust chimney, and start unit to output comfortable warm air. No complex ducting required. Exhaust is isolated and vented externally. Includes temperature controller for adjustable settings. Effective heating area: 20–30㎡, power: 20 kW, air flow: 1550 m³/h, power supply: 230V, output: 20 kW, fuel consumption: diesel, 4.7 L/h, weight: 53/61 kg (net/gross). Dimensions: 1200×350×550 mm.

Decontamination Wastewater Recovery Bag: Collects hazardous liquids such as firefighting water, decontamination wastewater, chemicals, and oils. Equipped with inlet/outlet ports; inlet compatible with drainage pump quick-connect. Safety valve facilitates waste recovery and discharge. Capacity: 500L. Folded dimensions: 40×40×30 cm.